- Model: 22530
Find a Dealer
- Outstanding 360-degree visibility
- Outstanding reach and lift height
Top
- Jump To
- Overview
- Features
- Specifications
- Accessories
- Documents
- Warranty
- Back To Top
Find a Dealer
Related Products
Light Kit for Dingo TXL 2000 models
Model: 136-4890
Dingo TXL 2000 50-hour filter kit
Model: 136-4898
Dingo TXL 2000 400-hour filter kit
Model: 136-4899
Dingo TXL 2000 1000-hour filter kit
Model: 136-4897
Overview
The Dingo TXL 2000 has you covered. No need for separate machines to unload, haul, dig and place material; the Dingo TXL 2000 can do it all. With the benefits of a compact utility loader, mini excavator and compact track loader rolled into one piece of equipment, it’s a smart solution that’s in a category of its own.
Features
Telescoping Arms
A Toro-exclusive telescoping arm design allows the operator to lift loads up to 123” high (hinge pin height) and reach out 44” for placement and removal of jobsite materials.
Superior Visibility
A dedicated stand-on machine offers superior 360° visibility for optimized jobsite performance and awareness.
Compact Footprint
A 54” wide frame allows the machine to access smaller spaces that larger machines are not able to.
2,000 lbs. ROC
An industry leading 2,000 lbs. rated operating capacity allows the operator to handle many jobsite materials suited for larger machines.
Controls
Toro’s exclusive traction control design allows operator’s of all skill levels to operate the machine with ease and precision. The loader arm control is designed to allow not only loader arm function control, but has the telescoping function, proportional auxiliary control, and directional left/right control for applicable Toro TXL 2000 attachments.
Ease of Access
The dedicated stand-on platform allows the operator to step-on and step-off the machine with ease and comfort to allow for enhanced jobsite efficiencies – not having to enter/exit a cab.
Specifications
| Air Filter | Two-stage, heavy-duty, remote |
|---|---|
| Cooling System | Liquid Cooled |
| Dump Angle | 46.3 degrees |
| Dump Height (cm) | 225.8 |
| Dump Height (inches) | 88.9 |
| Engine Make | Kubota |
| Engine Model | D1803 |
| Fuel Tank (gallons) | 18.3 |
| Fuel Tank (liters) | 69.3 |
| Fuel Type | Diesel |
| Ground Clearance (cm) | 16 |
| Ground Clearance (inches) | 6.3 |
| Ground Pressure | 5.3 psi |
| Ground Speed Forward (mph) | 5.4 |
| Ground Speed Foward (km/h) | 8.6 |
| Ground Speed Reverse (km/h) | 8.6 |
| Ground Speed Reverse (mph) | 5.4 |
| Hinge Pin Height (cm) | 313.4 |
| Hinge Pin Height (inches) | 123.4 |
| Hydraulic Flow | 21.5 gpm (81.4 lpm) each pump |
| Hydraulic Flow Auxilary | 21.4 gpm |
| Loader Arms | Radial |
| Manufacturer's Gross HP Rating (HP) | 49.6 |
| Manufacturer's Gross HP Rating (kW) | 37 |
| Max Operating Height (cm) | 172.2 |
| Max Operating Height (inches) | 67.8 |
| Oil Capacity (liters) | 7 |
| Oil Capacity (quarts) | 7.4 |
| Overall Height w/bucket (cm) | 172.2 |
| Overall Height w/bucket (inches) | 67.8 |
| Overall Height w/o bucket (cm) | 172.2 |
| Overall Height w/o bucket (inches) | 67.8 |
| Overall Length w/bucket (cm) | 347.7 |
| Overall Length w/bucket (inches) | 136.9 |
| Overall Length w/o bucket (cm) | 250.9 |
| Overall Length w/o bucket (inches) | 98.8 |
| Overall Width w/bucket (cm) | 139.7 |
| Overall Width w/bucket (inches) | 55 |
| Overall Width w/o bucket (cm) | 139.7 |
| Overall Width w/o bucket (inches) | 55 |
| Rated Operating Capacity* (kg) | 920 |
| Rated Operating Capacity* (lbs) | 417 |
| Reach – Fully Raised (cm) | 114.8 |
| Reach – Fully Raised (inches) | 45.2 |
| Reservoir Capacity (gallons) | 15.25 |
| Reservoir Capacity (liters) | 57.7 |
| Track Length (inches) | 162.2 |
| Track Length(cm) | 411.9 |
| Track Width (cm) | 29.9 |
| Track Width (inches) | 11.8 |
| Tracks | Sprocket-drive, 6 road wheels per side |
| Traction | Dual Hydrostatic Pump |
| Weight (kg) | 3034 |
| Weight (lbs) | 6690 |
| Wheelbase (inches) | 53.7 |
Disclaimer
*Per ISO 14397-1
Accessories
CAP-FUEL, LOCKING (Part # 126-4107)
Fuel Cap (Part # 136-4866)
Dingo TXL 2000 Track Aggressive (Part # 136-4869)
Track Aggressive
Light Kit for Dingo TXL 2000 models (Part # 136-4890)
Light Kit for Dingo TXL 2000 models - LED (500 LM)
Dingo TXL 2000 1000-hour filter kit (Part # 136-4897)
Dingo TXL 2000 1000-hour filter kit includes:
• hydraulic filter (charge) 75-1310
• inner air filter 108-3816
• fuel filter 136-4891
• outer air filter 108-3814
• engine oil filter 104-5169
• hydraulic filter auxiliary return 94-2621
Dingo TXL 2000 50-hour filter kit (Part # 136-4898)
Dingo TXL 2000 50-hour filter kit includes:
• engine oil filter 104-5169
• inner air filter 108-3816
• outer air filter 108-3814
Dingo TXL 2000 400-hour filter kit (Part # 136-4899)
Dingo TXL 2000 400-hour filter kit includes:
• engine oil filter 104-5169
• inner air filter 108-3816
• outer air filter 108-3814
• fuel filter 136-4891
Auxiliary Wire Harness Kit, Telescoping TXL 2000 Tool Carrier (Part # 139-1186)
TXL2000 Auger Drive (Part # 22532)
TXL2000 Trencher Head (Part # 22533)
TXL2000 Brush Cutter (Part # 22534)
TXL 2000 Grapple Attachment (Part # 22535)
Dig, rake, pile and load debris with this grapple, which features a 40” jaw opening to haul large amounts of brush in each load. The unique design allows efficient forward and reverse operation to drag loose material into piles. For maximum durability, the heavy-duty jaw and rake tines are constructed from 3/8″ Grade 80 steel.
TXL2000 Power Rake (Part # 22536)
TXL2000 Angle Broom (Part # 22538)
Skeleton Grapple (Part # 22541)
TXL2000 Tiller (Part # 22542)
TXL2000 Pick-up Broom (Part # 22543)
TXL 2000 Loader Bucket Attachment 29 Cubic Feet (Part # 22546)
Perfect for transporting bulk materials, this high-volume bucket is constructed for maximum durability. Features include heavy-duty top bracing, with up to five wear bars underneath and interior brace plates to add rigidity.
TXL 2000 Loader Bucket Attachment 12 Cubic Feet (Part # 22547)
Move rock, dirt, sand or other materials off and around the job site with this heavy-duty general-purpose bucket designed for dense and bulk materials. The hardened-steel cutting edge enhances cutting and digging capabilities for excellent performance and superior wear in tough digging conditions.
TXL 2000 Grading Bucket Attachment (Part # 22548)
This heavy-duty dirt bucket has a low-profile design and extended bottom for better visibility of the cutting edge. It’s specifically engineered for ditch maintenance, grading, slope work and construction applications.
TXL 2000 Adjustable Forks Attachment (Part # 22549)
Integrated frame rollers make loading and unloading material from flatbed trucks a breeze with these manually adjustable 42” forks. Tines are easy to adjust for carrying loads of various sizes, and high-strength steel reduces bending for increased fork life.
TXL 2000 Tool Carrier Leveler (Part # 22550)
U-BLADE, TXL 2000 (Part # 22572)
STUMP BUCKET, TXL 2000 (Part # 22573)
TXL 2000 Standard Bucket - No Edge (Part # 22576)
Move rock, dirt, sand or other materials off and around the job site with this heavy-duty general-purpose bucket designed for dense and bulk materials.
DINGO TXL 2000 SNOW THROWER (Part # 22583)
Documents
| Title | Documents |
|---|---|
| Dingo TXL 2000 Sell Sheet | PDF - Sellsheet-en-us |
| Dingo® TXL 2000 Brochure | PDF - Brochure-en-us |
Parts & Manuals
Select your model year from the options below to view parts & manuals.
| 22530 Serial # |
|---|
| 415300000-999999999 |
| 414400000-415299999 |
| 412700000-414399999 |
| 411800000-412699999 |
| 410150000-411799999 |
| 406500000-410149999 |
| 405540000-406499999 |
| 400000000-405539999 |
Warranty
For complete product warranty information contact Toro Customer Service
- 22530 Product Warranty
-
- FR (3467-301)
- EN (3467-299)
- ES (3467-300)
**See dealer for Warranty details.
